Tappet

A mechanic in your pocket.

Tappet explains warning lights, OBD-II trouble codes and strange noises in plain English, tells you if it’s safe to drive, and shows you the fix.

Coming to iPhone and Android in 2027.

How a check goes

Tell it what’s going on

Describe it in your own words, type in a code from a scanner or the parts store, or answer four quick questions if you’re not sure how to put it. Most problems don’t come with a code, so you don’t need one.

It grinds when I brake, and it’s worse in the morning.

P0301

Can you still drive the car?YesNoNot sure

Get a straight answer about driving it

Every result starts with one of four ratings, so you know right away whether it can wait until the weekend.

  1. Likely safe to drivebut schedule service soon
  2. Drive with cautionget this checked within a few days
  3. Driving not recommendedaddress this as soon as possible
  4. Do not drivethis needs immediate attention

If a likely cause is high risk, the result opens with a safety warning. At critical risk it tells you not to drive until a mechanic has looked at the car. Tappet helps you decide what to do next. It doesn’t replace an inspection.

See where the answer came from

Tappet doesn’t guess. It scores likely causes against a repair database built the way a technician thinks about a car (system, component, failure mode) and narrowed to your car’s make, model and year. The AI’s only job is to put those results into plain English. It sees only what the engine found, it isn’t allowed to invent torque specs or procedures, and when something isn’t in the database it says so.

PowertrainSpark plugsWorn spark plugsSpark plug replacement

Source on file: Toyota 2.5L spark plug replacement, for the 2019–2022 Camry. Sources range from manufacturer manuals, service bulletins and recalls to community guides, and each one carries a badge for how well it’s verified.

UnverifiedCommunity verifiedExpert verifiedManufacturer verified

Fix it, get help, or keep an eye on it

Every result ends with three paths. DIY walks you through the repair with tools, torque specs, time and cost. Get Help writes out what to tell your mechanic. Monitor lists what to watch for and when to check again.

DIYGet HelpMonitor

Spark plug replacementToyota 2.5L · Easy · about 45 min · est. $40–$120
  1. Let the engine cool. Remove the engine cover if there is one.
  2. Disconnect the ignition coil connector and remove the coil bolt. 10mm socket
  3. Pull the ignition coil and the spark plug. 5/8" plug socket
  4. Check the new plug’s gap. 0.044"
  5. Put a little anti-seize on the threads and install the new plug. 18 ft-lbs
  6. Reinstall the coil and connector. Repeat for the other cylinders.

Work on a cold engine.

On the Get Help tab

“My powertrain has an issue. I’m experiencing rough idle. I think it might be the spark plugs.”

Also mention code: P0301
Planned

See the problem on your own car

We’re building a 3D model of your car, in its body style and paint color. When Tappet finds a likely cause, the car will come apart in an exploded view with the parts involved marked, so you can see exactly where the problem is and what sits around it.

A code like P0301 becomes something you can point at, whether you’re doing the job yourself or showing the shop what you mean.

Loading the 3D model…

Paint: Supersonic Red · code 3U5

Concept preview of a planned feature, shown on a 2020 Toyota Camry TRD in its four factory colors. All but Midnight Black came with a black roof. Drag to turn the car, and slide to take it apart.

The 16-pin OBD-II port. Pins 6 and 14 (blue) carry the car’s CAN data. Pin 16 (yellow) is battery power, which is how a plug-in adapter runs without a battery of its own.

Built around the port under your dashboard

Every car and light truck sold in the US since 1996 has an OBD-II port, usually under the dash near the steering column. It’s where the car reports its trouble codes, and it’s how Tappet hears from your car.

Works today

Any OBD-II scanner

Plug in a scanner, read the code and type it into Tappet. Many auto parts stores will read it for you for free.

In development

Bluetooth adapter pairing

Pair a small adapter that stays plugged into the port, and Tappet reads trouble codes and live sensor data straight from the car. No typing. The app is already built to take scanner readings alongside what you tell it.

We’re looking for OBD-II adapter makers to build and test this with. Get in touch.

Also in the glovebox

The everyday things a car needs from you, kept in one place.

Code lookup
Enter an OBD-II code from the Home screen and get what it means in plain language, how serious it is, and the problems it’s linked to.
Repair library
Browse by system (cooling, brakes, electrical, suspension, powertrain) for step-by-step repairs with tools, torque specs, source citations and verification badges.
Your garage
Add every car in the household and pick its paint color. The car you have selected narrows every diagnosis to its make, model and year.
Maintenance
Upcoming service from the manufacturer’s schedule, right on the Home screen.
Sign in your way
Email, Google or Apple.

Where things stand

Tappet is in development for iPhone and Android. Diagnosis, code lookup, the Fix Path, the repair library and your garage all work end to end today, backed by 74 automated tests. The first cars it knows in depth are the 2019–2022 Toyota Camry, the 2016 Honda Accord and the 2007 Lexus RX 350.

Next come the plain-English AI explanations, notifications and a full maintenance view, then more makes and models. After that, live Bluetooth OBD-II scanning, so Tappet can read codes and sensor data straight from the car, and a 3D model of your own car that comes apart to show where a problem is. Early access opens in 2027.

A little about me. I grew up in an auto shop and have been working on cars my whole life. I’m also a software engineer, with degrees in computer science and mathematics.

I built Tappet because most drivers don’t have someone who knows cars to call when a light comes on. I wanted to give them the same straight answer I’d give a friend: what it means, whether it’s safe to drive, and what the fix should cost.

If you make OBD-II adapters, sell parts or run a repair shop, I’d like to talk.

Hakeem Ali Founder & CEO, Tappet

Want in early, or want to work together?

Write to us. A person reads every message, and partners in OBD-II hardware, parts and repair are especially welcome.